S&M Young Researcher Paper Award 2020
Recipients: Ding Jiao, Zao Ni, Jiachou Wang, and Xinxin Li [Winner's comments]
Paper: High Fill Factor Array of Piezoelectric Micromachined
Ultrasonic Transducers with Large Quality Factor

S&M Young Researcher Paper Award 2021
Award Criteria
Notice of retraction
Vol. 32, No. 8(2), S&M2292

Print: ISSN 0914-4935
Online: ISSN 2435-0869
Sensors and Materials
is an international peer-reviewed open access journal to provide a forum for researchers working in multidisciplinary fields of sensing technology.
Sensors and Materials
is covered by Science Citation Index Expanded (Clarivate Analytics), Scopus (Elsevier), and other databases.

Instructions to authors
English    日本語

Instructions for manuscript preparation
English    日本語

Template
English

Publisher
 MYU K.K.
 Sensors and Materials
 1-23-3-303 Sendagi,
 Bunkyo-ku, Tokyo 113-0022, Japan
 Tel: 81-3-3827-8549
 Fax: 81-3-3827-8547

MYU Research, a scientific publisher, seeks a native English-speaking proofreader with a scientific background. B.Sc. or higher degree is desirable. In-office position; work hours negotiable. Call 03-3827-8549 for further information.


MYU Research

(proofreading and recording)


MYU K.K.
(translation service)


The Art of Writing Scientific Papers

(How to write scientific papers)
(Japanese Only)

Copyright(C) MYU K.K.

Adaptive Speed Estimation with Genetic Algorithm for Vector- controlled Permanent Magnet Synchronous Motor Drive

Yung-Chang Luo, Song-Yi Xie, Chia-Hung Lin, and Ying-Piao Kuo

(Received June 21, 2021; Accepted September 8, 2021)

Keywords: vector-controlled (VC), permanent magnet synchronous motor (PMSM) drive, speed estimation, model reference adaptive system (MRAS), genetic algorithm (GA)

An adaptive speed estimation scheme was established for a vector-controlled (VC) permanent magnet synchronous motor (PMSM) drive. The current and voltage of the stator were used to develop a decoupling VC PMSM drive, and the speed, d-axis, and q-axis stator current control loops were designed using the linear PMSM mathematical model. Hall effect current sensors were used to measure the current of the PMSM. A model reference adaptive system (MRAS) was used to develop a speed estimation scheme based on the reactive power of the PMSM. The pole placement was used to design the d-axis and q-axis stator current controllers, and the speed controller was designed using the genetic algorithm (GA). The MATLAB/Simulink® toolbox was used to establish the simulation scheme, and all the control algorithms were realized by a microprocesser control card. Simulation and experimental results (including the estimated rotor speed, stator current, estimated electromagnetic torque, stator flux position angle, and stator flux locus) confirmed the effectiveness of the proposed approach.

Corresponding author: Yung-Chang Luo




Forthcoming Regular Issues


Forthcoming Special Issues

Special Issue on Intelligent Manufacturing and Application Technology Part 1
Guest editor, Cheng-Chi Wang (National Chin-Yi University of Technology)
Call for paper


Special Issue on Smart Sensing Technologies and Their Application in Forest Management and Engineering
Guest editor, Byoungkoo Choi (Kangwon National University)
Call for paper


Special Issue on Sensors, Materials, and Computational Intelligence Algorithms in Robotics and AI Engineering
Guest editor, Pitikhate Sooraksa (King Mongkut’s Institute of Technology Ladkrabang)
Call for paper


Special Issue on Microfluidics and Related Nano/Microengineering for Medical and Chemical Applications
Guest editor, Yuichi Utsumi (University of Hyogo)
Call for paper


Special Issue on International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications 2019 (Bio4Apps 2019) (2)
Guest editor, Hirofumi Nogami and Masaya Miyazaki (Kyushu University)
Conference website


Special Issue on High-sensitivity Sensors and Sensors for Difficult-to-measure Objects
Guest editor, Ki Ando (Chiba Institute of Technology)
Call for paper


Copyright(C) MYU K.K. All Rights Reserved.